Color photography


Color photography is photography that uses media capable of preserving colors and is produced chemically during the photographic processing phase. It is often contrasted with black-and-white photography, which uses media capable only of showing shades of gray and does not include hand colored photographs. Some examples of color photography include: Prints, color negatives, transparencies (i.e. 35mm color slides), roll films, and sheet films.

Different types of color photographic processes

The experimentation of creating photographs that mirrored the colors of real life began as early as 1896. It is important to be able to identify different photographic processes because each process may require different methods of preservation.

1896 – Joly Plate <br /> 1907 (Patented 1904) – Autochrome <br /> 1908 – Dufaycolor (Color transparencies) <br /> 1908 – Finlay Colour (Color transparencies) <br /> 1919 (Invented 1905)– Tri-Color Carbro Prints <br /> 1935 – Kodachrome (16mm motion-picture film) <br /> 1936 – Kodachrome (35m still film) <br /> 1936 – Agfacolor (Transparency Film) <br /> 1940 – Ektachrome (Slide film) <br /> 1942 – Kodacolor (Color negative process) <br /> 1946 – Dye Transfer Prints (Imbibition process) <br /> 1965 – Polacolor by Polaroid (Dye diffusion transfer process)

Modern color film

The first modern ('integrated tri-pack') color film, Kodachrome, was introduced in 1935 based on three colored emulsions. Most modern color films, except Kodachrome, are based on technology developed for Agfacolor (as 'Agfacolor Neue') in 1936. (In this newer technology, chromogenic dye couplers are already within the emulsion layers, rather than having to be carefully diffused in during development.) Instant color film was introduced by Polaroid in 1963.

There are basically two color systems:

  1. Additive: The colors are added as colored lights. In this system, the most common set of primary colors is red, green and blue. Maxwell's experiment was of this type, as are screen-plate methods, such as Autochrome. Modern digital photographs seen on a VDG are also viewed by addition of light from an RGB phosphor array.
  2. Subtractive: Colors are subtracted from white light by dyes or pigments. In this system the most common set of primary colors is cyan, magenta and yellow. Ducos du Hauron made several pictures by this method in the late 1800s.

Several commercial print methods were devised using the subtractive technique during the 1930s (see e.g. Coe, ref 1), for printing from 'separation negatives'. Kodachrome was the first commercially-available 'integrated tri-pack' film of this type.

There are two main types of color film in current use:

Preservation Issues

What destroys color photographs/ The instability of color photographs

Numerous factors can deteriorate and destroy photographs. Some examples include:

Light fading occurs when materials are exposed to light, for example, why on display. The intensity of the light source and ultra-violate (UV) rays will effect the rate of change and fade. Magenta dyes will typically fade the quickest.<br />

Highlight Staining/ Staining occurs with older color photographic papers which is a yellowing of the border and highlight areas of a photograph.

Ideal storage environment for color photographic materials

<br /> In general, the colder the storage, the longer the life of color photographs. Frost- free refrigeration, more commonly known as cold storage (below freezing) is one of the most effective methods to bring to a halt the unalterable effects of color photographic materials. However, selecting this type of storage environment is costly and requires special training to remove items and return items. Therefore, cool storage (above freezing) is more common and less costly, which requires that the temperature is consistent between 10ºC - 15ºC (50ºF - 60ºF) with 30-40% relative humidity with special attention to dew point to eliminate concerns for condensation. General dark storage in light tight enclosures and storage boxes is always advised for individual items. When materials are exposed to light during handling, usage, or display - light sources should be UV-filtered and intensity kept at minimum. In storage areas, 200-400 lux is recommended.

Recommended enclosures and housing for color photographs

The usage of enclosures for photographs is the easiest method from protecting materials from being destroyed by handling and usage. All protective materials must pass the Photographic Activity Test (PAT) as described both by the American National Standards Institute (IT9.2-1988) and the International Organization for Standardization (ISO 14523:1999(E).Photography – Processed Photographic Materials – Photographic Activity Test for Enclosure Materials). The PAT is a test that determined what kind of enclosures will preserve, prevent, and/or prolong from further deterioration while in storage. <br />

It is recommended that each individual item has its own enclosure and that each enclosure chosen for a photograph is of an appropriate size. Archival enclosures may come in two different forms: paper or plastic. Choosing either option has its advantages and disadvantages. <br />

After photographic materials are individually enclosed, housing or storage containers provide another protective barrier such as folders and boxes made from archival paperboard as addressed in ISO Standards 14523 and 10214. Sometimes these containers have to be custom-made in order to properly store odd sizes. In general, flat storage of in boxes is recommended because it provides more stable support, particularly for materials that are in more fragile condition. Still, boxes and folders should never be over-filled with materials.

See also

People

External links

Internet Resources compiled by the Northeast Document Conservation Center

Online Collections:

Supplies:

Standards:

References

Notes